Miracast Trouble Shooting on Windows 10

In general, to mirror your display using Miracast on your Windows 10, both the source and the display receiver should be Miracast certified. First of all, you can check devices at https://www.wi-fi.org/product-finder-results?capabilities=2&items=300 then download a spreadsheet with all Miracast certifications.

To solving this Miracast connectivity issues, you must verifying the miracast devices are certified or not yet. If your devices are certified, but Charms, Devices, Project does not offer “add a wireless display”, check for software that might disable Miracast functionality by hooking into the network stack.

Applies To: Windows 8.1 Miracast enabled computers and tablets, including Surface 2, Surface Pro, Surface Pro2, Surface Pro 3. (The original Surface RT is not Miracast capable)

Software or Policies that may prevent Miracast from Working:

1. VPN software (note that Netgear ReadyCloud software also adds a hidden VPN device and may be installed by the Genie installer).

Some third party VPN solutions identify WiFi Direct (the underlying technology for Miracast) as a “Split Tunnel” and deem it a risk to security so they disable the functionality.

Windows 8.1 has built in support for some third party VPN solutions, but not all. Currently supported are Checkpoint VPN, F5 VPN, Juniper Networks Junos Pulse, Microsoft, and SonicWALL Mobile Connect. You will need to uninstall third party VPN clients (and
restart) and then configure. If your VPN solution is not supported, you will probably need to completely uninstall it and reboot to use Miracast successfully.

To setup a native VPN connection:

  • First, access Windows 8.1 native VPN connections: from the Start screen type
    VPN
    and search Miracast troubleshoot on windows 10
  • Next, select Manage virtual private networks (VPN). You can then select one of the supported VPN solutions and complete the setup.

 

 

2. Some group policy settings or firewall settings if you are on a domain. This thread on TechNet may help you resolve this issue:

https://social.technet.microsoft.com/Forums/en-US/8a1060b2-2e79-49b4-bcca-76c15a639513/miracast-broke-after-connecting-to-domain?forum=w8itprogeneral

3. Third party anti virus and/or firewalls – recommend completely uninstalling these, restarting, and then checking to see if you can add a wireless display. You may be able to create a firewall rule for third party programs.

4. Third party virtualization software like VirtualBox
either uninstall VirtualBox or uncheck the VirtualBox item in Wi-Fi Properties and reboot.

 

5. Netgear Genie installs a virtual adapter called NETGEAR Firewall Driver similar to the above VirtualBox Drive. Either uninstall the Netgear Genie software or uncheck the item in the properties box and reboot.

Microsoft branded Wireless Display Adapter fails to connect, everything else looks good.

If your Microsoft Wireless Display Adapter doesn’t negotiate a connection with your computer or tablet, the following may help. This process may work for other branded Miracast dongles as well.

  1. Go to Control Panel and open Device Manager and expand devices
  2. Uninstall the Microsoft Miracast Display Adapter
  3. Unplug  the wireless display adapter from the power source and the monitor and then re-connect Microsoft Wireless Display Adapter to monitor and power it up with USB power source or USB AC adapter from another device.
  4. Reset the MWDA. Press and hold the Reset button for 10 seconds. When the button is released, you will see the LED light blink on the adapter and a message on the TV that indicates it is resetting. Wait until it indicates “Ready to connect”.
  5. Restart your computer. Rediscover the MWDA – Slide in from the right side and select Devices from Charms. Select Project and then Add a Wireless Display. Connect to the Microsoft Wireless Display Adapter.

Note: Bluestacks is known to cause audio and video stuttering on the Surface Pro 3. Uninstalling Bluestacks resolves the issue.